A.B.S. Warning Contact, brake pad wear
Made in Germany
Should be replaced when installing new brake pads
This brake pad sensor monitors your brake pads thickness. When the minimum thickness is reached on your brake pads, this sensor will come in contact with the rotor setting off the brake light on your dash. When this sensor is tripped it is your car telling you it is time to order new pads. This is considered a safety item and should be replaced every time you change your brake pads.
Disc Brake Pad Wear Sensor
Disc Brake Pad Wear Sensors, or Brake Pad Sensor, as they’re commonly called, are used as an instrument to alert the driver when the brake pads of the vehicle are at a low level and are in need of replacement. Operation of the sensor is simple where it is wired to the brake control module with 12v and when the brake pad becomes low enough, the sensor will ultimately surface and make contact with the rotor which in turn grounds the sensor and completes the circuit which triggers the light in your instrument cluster. The Brake Pad Wear Sensor is recommended to be replaced at the time of brake pad replacement.
COMPATIBILITY WITH PASSENGER CARS
BMW Z4 Roadster (E89) (Year of Construction 05.2009 – 08.2016, 204 – 306 PS, Petrol)
• sDrive23i 2.5, Year of Construction 05.2009 – 08.2011, 2497 ccm, 204 PS
• sDrive30i 3.0, Year of Construction 05.2009 – 08.2011, 2996 ccm, 258 PS
• sDrive35i 3.0, Year of Construction 05.2009 – 08.2016, 2979 ccm, 306 PS